This tip represents a quick list of ports that are used within the UCS environment. The source for these settings came from Cisco documentation.
- 2013/02/07 - Initial article.
Since the steps below detail how to configure your system I feel like to need to remind you that this is NOT an official Cisco web site or resource. This page as with all information found on this site, http://ciscoquicklinks.com does NOT take any legal responsibility for the results of performing any of these tests in your environment. The content of this page and site including may include errors and inaccuracies and are provided for informational purposes only and should be considered "use at your own risk". Please refer to http://cisco.com/go/ucs and it's related support web sites for "official" and "legally responsible" types of information.
HTTP—By default, TCP port 80
HTTPS—By default, TCP port 443
FTP—By default, TCP port 21
TFTP—By default, UDP port 69
SSH/SFTP/SCP—By default, TCP port 22
SNMP—By default, UDP port 161. 162
SMTP—By default, TCP port 25
DNS—By default, UDP port 53
IPMI—By default, UDP port 623
SoL—By default, TCP port 22
KVM—By default, TCP port 2068